BPC Joist Hangers - Timber to Masonry

The prices displayed are based on the purchase of full outer quantities. Price breaks are available where indicated.

Joist Hanger - Type S (Standard)

-A comprehensive range of single piece non-welded timber to masonry hangers, designed to support timber joists from brick or block walls.
-The standard hanger is designed for building into brickwork or blockwork.
-Hangers 150mm deep and over are manufactured 10mm less to allow for notching and regularisation of timber joists.
-All hangers feature 75mm bearing surface and pre-punched side gussets to allow nail fixing into timber joists with 30 x 3.75mm sherardised square twist nails.
-Wide top flange design offers increased loading capacity on masonry with a minimum crushing strength of 3.5N/mm2 and above.
-As standard all hangers are manufactured from 2.0mm thick pre-galvanised steel to BS EN 10346:2009 + G275, independently tested and compliant with BS EN 845-1 and to the requirements of BS5268.

Joist Hanger - Type S (Standard)
Code Barcode Size Finish Box Qty Outer MOQ
BPCSMHS47X100 5060138582835 47 x 100mm Galvanised 1 40 Login or call us for details of your nearest distributor.
BPCSMHS47X175 5060138582866 47 x 175mm Galvanised 1 30 Login or call us for details of your nearest distributor.
BPCSMHS47X200 5060138582873 47 x 200mm Galvanised 1 25 Login or call us for details of your nearest distributor.
BPCSMHS47X225 5060138582880 47 x 225mm Galvanised 1 25 Login or call us for details of your nearest distributor.
BPCSMHS50X150 5060138580138 50 x 150mm Galvanised 1 40 Login or call us for details of your nearest distributor.
BPCSMHS50X175 5060138580145 50 x 175mm Galvanised 1 30 Login or call us for details of your nearest distributor.
BPCSMHS50X200 5060138580152 50 x 200mm Galvanised 1 25 Login or call us for details of your nearest distributor.
BPCSMHS50X225 5060138580169 50 x 225mm Galvanised 1 25 Login or call us for details of your nearest distributor.
BPCSMHS75X150 5060138580275 75 x 150mm Galvanised 1 25 Login or call us for details of your nearest distributor.
BPCSMHS75X175 5060138580282 75 x 175mm Galvanised 1 20 Login or call us for details of your nearest distributor.
BPCSMHS75X200 5060138580299 75 x 200mm Galvanised 1 20 Login or call us for details of your nearest distributor.
BPCSMHS75X225 5060138580305 75 x 225mm Galvanised 1 20 Login or call us for details of your nearest distributor.
BPCSMHS100X150 5060138580343 100 x 150mm Galvanised 1 20 Login or call us for details of your nearest distributor.
BPCSMHS100X200 5060138580367 100 x 200mm Galvanised 1 15 Login or call us for details of your nearest distributor.
BPCSMHS100X225 5060138580374 100 x 225mm Galvanised 1 15 Login or call us for details of your nearest distributor.
BPCSMHS150X225 5060138580480 150 x 225mm Galvanised 1 10 Login or call us for details of your nearest distributor.

Joist Hanger - Type S (Standard)

-A comprehensive range of single piece non-welded timber to masonry hangers, designed to support timber joists from brick or block walls.
-The standard hanger is designed for building into brickwork or blockwork.
-Hangers 150mm deep and over are manufactured 10mm less to allow for notching and regularisation of timber joists.
-All hangers feature 75mm bearing surface and pre-punched side gussets to allow nail fixing into timber joists with 30 x 3.75mm sherardised square twist nails.
-Wide top flange design offers increased loading capacity on masonry with a minimum crushing strength of 3.5N/mm2 and above.
-As standard all hangers are manufactured from 2.0mm thick pre-galvanised steel to BS EN 10346:2009 + G275, independently tested and compliant with BS EN 845-1 and to the requirements of BS5268.

Joist Hanger - Type S (Standard)
Code
BPCSMHS47X100
BPCSMHS47X175
BPCSMHS47X200
BPCSMHS47X225
BPCSMHS50X150
BPCSMHS50X175
BPCSMHS50X200
BPCSMHS50X225
BPCSMHS75X150
BPCSMHS75X175
BPCSMHS75X200
BPCSMHS75X225
BPCSMHS100X150
BPCSMHS100X200
BPCSMHS100X225
BPCSMHS150X225

Joist Hanger - Type S (Standard)

-A comprehensive range of single piece non-welded timber to masonry hangers, designed to support timber joists from brick or block walls.
-The standard hanger is designed for building into brickwork or blockwork.
-Hangers 150mm deep and over are manufactured 10mm less to allow for notching and regularisation of timber joists.
-All hangers feature 75mm bearing surface and pre-punched side gussets to allow nail fixing into timber joists with 30 x 3.75mm sherardised square twist nails.
-Wide top flange design offers increased loading capacity on masonry with a minimum crushing strength of 3.5N/mm2 and above.
-As standard all hangers are manufactured from 2.0mm thick pre-galvanised steel to BS EN 10346:2009 + G275, independently tested and compliant with BS EN 845-1 and to the requirements of BS5268.

Joist Hanger - Type S (Standard)
Code Pack Weight (Kg) Outer Qty Outer Weight (Kg)
BPCSMHS47X100 0.35 40 14
BPCSMHS47X175 0.47 30 14.1
BPCSMHS47X200 0.528 25 13.2
BPCSMHS47X225 0.52 25 13
BPCSMHS50X150 0.4 40 16
BPCSMHS50X175 0.47 30 14.1
BPCSMHS50X200 0.512 25 12.8
BPCSMHS50X225 0.56 25 14
BPCSMHS75X150 0.448 25 11.2
BPCSMHS75X175 0.55 20 11
BPCSMHS75X200 0.54 20 10.8
BPCSMHS75X225 0.595 20 11.9
BPCSMHS100X150 0.65 20 13
BPCSMHS100X200 0.67 15 10.05
BPCSMHS100X225 0.733 15 10.995
BPCSMHS150X225 1.07 10 10.7