Wera Screwdriver Bits & Accessories

-Wera TH Torsion Zone Bits.
-Wera Torsion technology increases service life of the bit.
-Torsion-style design reduces premature wear, extra hard.
-Made from high grade steel and precision manufactured.
-TH bits are specifically designed for use in high torque screwdriving applications, such as wood.
-Combined with the BiTorsion Rapidaptor bit holder, performance is further improved.
-Ideal for use in general construction.
-Use the Wera BiTorsion Bit Holder to increase the service life of the bit.

-Wera BTH BiTorsion Zone Bits.
-Wera's BiTorsion Extra Hard bit range is specially designed for fastening into wood.
-Hard wearing long life due to the innovative BiTorsion system; unique precision hardening.
-The extra hardness combined with the softer BiTorsion zone allows the bit to perform under immense constant increase in torque.
-The BiTorsion precision hardened bit allows the metal to flex slightly in controlled areas and absorb the stresses applied by a power tool.
-Extremely hard wearing, premium quality. (Use the Wera Impaktor System for unbeatable performance in high voltage impact drivers).
-Use the Wera BiTorsion Bit Holder to increase the service life of the bit.
-Ideal for use in general construction.

-Wera Impaktor Torsion Zone Bits.
-This premium range of Impaktor screwdriver bits are part of the patented TriTorsion system.
-Diamond coated, anti cam-out screwdriver bits are specifically designed for cordless impact drivers and are suited to the heaviest duty jobs.
-The TriTorsion system means the bit and bit holder have been precision hardened.
-Allows the metal to flex in controlled areas and absorb the stresses applied by constant use in heavy duty impact drivers.

-Wera Z Torx Bits.
-Ductile, tough bits.
-Made from high grade steel and precision manufactured.
-These bits are specifically designed for use in difficult screwdriving applications, such as in sheet metal or steel.
-Extremely hard wearing, premium quality Extra tough and ideal for screwdriving into metal.
-Drive: 1/4" Hex.

-Wera TZ Torx Torsion Zone Bits.
-Ductile, tough bits with torsion zone. Wera's Torsion technology absorbs the damaging peak torque loads that cause premature wear.
-Made from high grade steel and precision manufactured.
-These bits are specifically designed for use in difficult screwdriving applications, such as in sheet metal or steel.
-Combined with the BiTorsion Rapidaptor bit holder, performance is further improved.
-Torsion technology and unique precision hardening process increases service life of the bit.
-Extremely hard wearing, premium quality Extra tough and ideal for screwdriving into metal.
-Drive: 1/4" Hex.

-Wera BTZ Torx BiTorsion Zone Bits.
-Wera's BiTorsion Extra Hard bit range is specially designed for hard materials such as sheet steel or metal.
-The extra hardness combined with the softer BiTorsion zone allows the bit to perform under immense constant increase in torque.
-The BiTorsion system allows the precision hardened bit to flex slightly in controlled areas and absorb the stresses applied by a power tool.
-Extremely hard wearing, premium quality. (Use the Wera Impaktor System for unbeatable performance in high voltage impact drivers).
-Extra tough long life due to the innovative BiTorsion system; unique precision hardening.
-Ideal for use in general construction.
-Use the Wera BiTorsion Bit Holder to increase the service life of the bit.

-Wera Stainless Steel Bits.
-Stainless Steel screwdriver bit for use with stainless steel screws.
-The use of stainless tools with stainless steel fasteners prevents the cross contamination of metal, preventing rust from a galvanic process.
-Vacuum ice-hardened for industrial strength.
-For use in the construction and food industries or wherever stainless steel fasteners and materials are used.
-Stainless steel for minimising rust.
-Length: 89mm.
-Drive: 1/4" Hex.

-Wera TS Torsion Stainless Steel Bits.
-Stainless Steel screwdriver bit for use with stainless steel screws.
-The use of stainless tools with stainless steel fasteners prevents the cross contamination of metal, preventing rust from a galvanic process.
-Vacuum ice-hardened for industrial strength.
-A Torsion zone absorbs peak loads and prolongs the life of the bit.
-For use in the construction and food industries or wherever stainless steel fasteners and materials are used.
-Stainless steel for minimising rust.
-Special Torsion-style design to reduce premature wear.
-Length: 25mm.
-Drive: 1/4" Hex.

-Wera Bit-Check's offer screwdriver bits and bit holder in a robust compact case.
-Case is thinner than the thickest tool they contain.
-The bit range is set up to allow rapid overview and bit selection, with a simple single-hand opening mechanism.
-Wera's Torsion technologyabsorbs the damaging peak torque loads that cause premature wear.
-Made from high grade steel and precision manufactured.
-Specifically designed for use in high torque screwdriving applications, such as wood.
-Ideal for use in general construction.

Contains:
-895/4/1 K Universal Bit Holder (1/4"x52 x1) with quick-release chuck.
-855/1 TH PZ (PZ1x25 x3, PZ2x25 x3, PZ3x25 x3).

-Wera Bit-Check's offer screwdriver bits and bit holder in a robust compact case.
-Case is thinner than the thickest tool they contain.
-The bit range is set up to allow rapid overview and bit selection, with a simple single-hand opening mechanism.
-Wera's Torsion technology absorbs the damaging peak torque loads that cause premature wear.
-Made from high grade steel and precision manufactured.
-Specifically designed for use in difficult screwdriving applications, such as in sheet metal or steel.
-Hard wearing long life due to the Torsion system Bit holder with quick release chuck.
-Extra Tough ideal for screwdriving into sheet metal or steel.
-Ideal for use in general construction.

Contains:
-894/4/1 K Bit Holder (1/4"x51 x1) with quick-release chuck.
-867/1 TZ TORX (TX8x25 x1, TX9x25 x1, TX10x25 x1, TX15x25 x1, TX20x25 x1, TX25x25 x1, TX27x25 x1, TX30x25 x1, TX40x25 x1).

-Wera Bit-Check's offer screwdriver bits and bit holder in a robust compact case.
-Case is thinner than the thickest tool they contain.
-The bit range is set up to allow rapid overview and bit selection, with a simple single-hand opening mechanism.
-Ductile, tough and absorbing TORX screwdriver bits with borehole (BO) made from high quality and high strength materials.
-The unique hardening processes makes them incredibly hard wearing and the first choice for the professional.
-The TORX BO profile prevents unauthorised unfastening of safety screws.
-Contains a security pin designed to fit into the borehole of TORX BO bits allowing safety screws to be unfastened.
-Suitable for general use but also ideal for metal applications; screwdriving self-tapping screws into sheet metal or where fasteners are driven to a dead stop.
-Hard wearing long life due to the Torsion system Bit holder with quick-release chuck.
-TORX BO profile allowing TORX safety pin screws to be actuated. Ideal for use in general construction.

Contains:
-894/4/1 Bit holder (1/4"x51 x1) with quick-release chuck.
-867/1 Z TORX BO (TX10x25 x1, TX15x25 x1, TX20x25 x1, TX25x25 x1, TX30x25 x1, TX40x25 x1).

-Wera Bit-Check's offer screwdriver bits and bit holder in a robust compact case.
-Case is thinner than the thickest tool they contain.
-The bit range is set up to allow rapid overview and bit selection, with a simple single-hand opening mechanism.
-Ductile, tough bits with torsion zone. Wera's Torsion technology absorbs the damaging peak torque loads that cause premature wear.
-Made from high grade steel and precision manufactured.
-Specifically designed for use in difficult screwdriving applications, such as in sheet metal or steel.
-Hard wearing long life due to the Torsion system.
-Bit holder with quick-release chuck.
-Strong permanent magnet and spin sleeve allowing safe and comfortable work. Ideal for use in general construction.

Contains:
-889/4/1 K Bit Holder 1/4" x 50 with quick-release chuck.
-851/1 TZPH (PH1x25 x1, PH2x25 x1, PH3x25 x1).
-855/1 TZ PZ (PZ1x25 x1, PZ2x25 x1, PZ3x25 x1).
-800/1 TZ (0.8x5.5x25 x1, 1.0x5.5x25 x1, 1.2x6.5x25 x1).

-Wera Bit-Check's offer screwdriver bits and bit holder in a robust, compact case.
-Case is thinner than the thickest tool they contain.
-The bit range is set up to allow rapid overview and bit selection, with a simple single-hand opening mechanism.
-This set includes the Ringmagnet Rapidaptor bit holder which securely holds up to a 10" screw.
-Easy to drive screws into confined or overhead spaces.
-It also features an auto bit lock for single hand bit change.
-Pozidriv Extra Hard Bits and Torx Extra Tough Bits with Torsion technology that increases the service life of the bit.
-Absorbs the damaging peak torque loads that cause premature wear.
-Made from high grade steel and precision manufactured.
-Hard wearing long life bits due to the Torsion system.
-Spin sleeve allows the steadying of the screw start.
-Ideal for use in general construction.

Contains:
-887/4 RR Universal Bit Holder (1/4"x57 x1).
-855/1 TH PZ (PZ1x25 x1, PZ2x25 x2).
-867/1 TZ TORX (TX10x25 x1, TX15x25 x1, TX20x25 x1, TX25x25 x1, TX30x25 x1, TX40x25 x1).

-Wera Bit-Checks Rapidator BiTorsion with Ringmagnet.
-Wera's BiTorsion Extra Hard bit range is specially designed for fastening into wood.
-The extra hardness combined with the BiTorsion zone allows the bit to perform under the immense constant increase in torque applied when driving into wood.
-The BiTorsion system means that the bit has been precision hardened.
-Allows metal to flex slightly in controlled areas and absorb the stresses applied by a power tool.
-This compact 10 piece set also contains a high quality Ringmagnet quick release bit holder.
-One handed easy start and access to hard to reach areas.
-Use the Wera Impaktor System for unbeatable performance in high voltage impact drivers.
-Hard wearing long life due to the innovative BiTorsion system.
-Unique precision hardening Bit holder has magnetic function to hold screws up to 10" long.
-Ideal for use in general construction.

-Wera Mini Bit-Check 6 PZ Universal
-Wera Mini-Checks with 6 x 50mm long bits suitable for bit holders or for direct machine drive.
-Tough absorbing, torsion-style design (TZ) to reduce premature wear.
-Ideal for difficult screwdriving jobs e.g. in sheet steel or metal.
-Hard wearing long life due to the Torsion system.
-Extra Tough ideal for screwdriving into sheet metal or steel.
-Precision manufactured for a perfect fit.
-Ideal for use in general construction.

Contains:
-855/4TZ PZ (PZ1x50 x2, PZ2x50 x3, PZ3x50 x1).

-Wera Mini Bit-Checks TX Universal.
-Wera Mini-Checks with 6x50mm long bits suitable for bit holders or for direct machine drive.
-Tough absorbing, torsion-style design (TZ) to reduce premature wear.
-Ideal for difficult screwdriving jobs e.g. in sheet steel or metal.
-Hard wearing long life due to the Torsion system.
-Extra Tough ideal for screwdriving into sheet metal or steel.
-Precision manufactured for a perfect fit.
-Ideal for use in general construction.

Contains:
-867/4 Z TORX (TX10x50 x1, TX15x50 x1, TX20x50 x1, TX25x50 x1, TX30x50 x1, TX40x50 x1).

-Wera Bit-Check 10 Rapidator BiTorsion 2.
-Wera Bit-Check's offer screwdriver bits and bit holder in a robust, compact case.
-Case is thinner than the thickest tool they contain.
-The bit range is set up to allow rapid overview and bit selection, with a simple single-hand opening mechanism.
-This set includes BiTorsion Rapidaptor Bit Holder with Patented BiTorsion System for longer service life.
-Press in auto bit lock; single hand bit change and spin sleeve allowing steadying of the screw start.
-BiTorsion Extra Tough bits allow peak loads to be absorbed in the BiTorsion zone avoiding premature bit breakage.
-Precision hardened Bitorsion system allows the bit to flex slightly in controlled areas and absorb the stresses applied by a power tool.
-Extremely hard wearing, premium quality bits.
-BiTorsion Bit Holder with longer service life, single hand bit change and spin sleeve.
-Ideal for use in general construction. Use the Wera BiTorsion Bit Holder to increase the service life of the bit.

Contains:
-897/4 R BiTorsion Bit Holder 1/4"x75 Rapidator with quick-release chuck.
-851/1 BTZ PH (PH2x25 x1).
-855/1 BTZ PZ (PZ1x25 x1, PZ2x25 x2).
-867/1 TORX BTZ (TX10x25 x1, TX15x25 x1, TX20x25 x1, TX25x25 x1, TX30x25 x1).

-Wera Bit-Check 10 Rapidator BiTorsion 2.
-Wera Bit-Check's offer screwdriver bits and bit holder in a robust, compact case.
-Case is thinner than the thickest tool they contain.
-The bit range is set up to allow rapid overview and bit selection, with a simple single-hand opening mechanism.
-This set includes BiTorsion Rapidaptor Bit Holder with Patented BiTorsion System for longer service life.
-Press in auto bit lock; single hand bit change and spin sleeve allowing steadying of the screw start.
-BiTorsion Extra Tough bits allow peak loads to be absorbed in the BiTorsion zone avoiding premature bit breakage.
-Precision hardened Bitorsion system allows the bit to flex slightly in controlled areas and absorb the stresses applied by a power tool.
-Extremely hard wearing, premium quality bits.
-BiTorsion Bit Holder with longer service life, single hand bit change and spin sleeve.
-Ideal for use in general construction. Use the Wera BiTorsion Bit Holder to increase the service life of the bit.

Contains:
-BiTorsion Bit Holder 1/4"x75 Rapidator with quick-release chuck.
-BiTorsion BTZ PZ1x25mm x1.
-BiTorsion BTZ PZ2x25mm x7.
-BiTorsion BTZ PZ3x25mm x1.

-Wera Bit-Check30 Rapidator BiTorsion1.
-Wera Bit-Check's offer screwdriver bits and bit holder in a robust, compact case.
-Case is thinner than the thickest tool they contain.
-The bit range is set up to allow rapid overview and bit selection, with a simple single-hand opening mechanism.
-This set includes BiTorsion Rapidaptor Bit Holder with Patented BiTorsion System for longer service life.
-Press in auto bit lock; single hand bit change and spin sleeve allowing steadying of the screw start.
-BiTorsion Extra Tough bits allow peak loads to be absorbed in the BiTorsion zone avoiding premature bit breakage.
-Precision hardened Bitorsion system allows the bit to flex slightly in controlled areas and absorb the stresses applied by a power tool.
-Extremely hard wearing, premium quality bits.
-BiTorsion Bit Holder with longer service life, single hand bit change and spin sleeve.
-Ideal for use in general construction.
-Use the Wera BiTorsion Bit Holder to increase the service life of the bit.

Contains:
-BiTorsion Bit Holder 1/4" x50mm Rapidator bit holder.
-BiTorsion 25mm BTZ Phillips bits: PH1 (x2), PH2 (x5), PH3 (x2).
-BiTorsion 25mm BTZ Pozidriv bits: PZ1 (x2), PZ2 (x6), PZ3 (x2).
-BiTorsion 25mm BTZ Torx bits: TX10, TX15 (x2), TX20 (x2), TX25 (x2), TX30 (x2), TX40.

-Bit-Check 10 Impaktor 3.
-Impaktor bit set contains the premium TriTorsion Bit Holder with optional Ringmagnet function to hold screws up to 10" long.
-Stored in a slim compact easy open case for tool security easy bit selection.
-Specifically designed for cordless impact drivers, these bits are suited to the heaviest duty jobs.
-Diamond coated for anti cam-out, the patented Impaktor system is unrivalled in performance.
-The TriTorsion system means that together the bit and holder have three torsion zones.
-Absorb the stresses applied by constant use in heavy duty impact drivers.
-Due to the precision hardening processes, the life of the screwdriver bits is dramatically increased.
-Patented long life TriTorsion system - for above average service life.
-Precision manufactured for a perfect fit.

Contains:
-897/4 Impaktor R Holder 1/4"x75.
-855/1 IMP DC (PZ2x25 x3, PZ3x25 x1).
-867/1 IMP DC (TX25x25 x3, TX30x25 x1, TX40x25 x1).

-Bit-Check 10 PZ Impaktor 1.
-Impaktor bit set contains the premium TriTorsion Bit Holder with optional Ringmagnet function to hold screws up to 10" long.
-Stored in a slim compact easy open case for tool security easy bit selection.
-Specifically designed for cordless impact drivers, these bits are suited to the heaviest duty jobs.
-Diamond coated for anti cam-out, the patented Impaktor system is unrivalled in performance.
-The TriTorsion system means that together the bit and holder have three torsion zones.
-Absorb the stresses applied by constant use in heavy duty impact drivers.
-Due to the precision hardening processes, the life of the screwdriver bits is dramatically increased.
-Patented long life TriTorsion system - for above average service life.
-Precision manufactured for a perfect fit.

Contains:
-897/4 Impaktor R Holder 1/4"x75.
-855/1 IMP DC (PZ2x25 x7, PZ3x25 x2).

-Wera Bit-Check 30 Impaktor 1.
-Impaktor bit set contains the premium TriTorsion Bit Holder with optional Ringmagnet function to hold screws up to 10" long.
-Complemented by additional screwdriver bit sizes from the high quality Wera bit range.
-Stored in a slim compact easy open case for tool security easy bit selection.
-Specifically designed for cordless impact drivers, these bits are suited to the heaviest duty jobs.
-Diamond coated for anti cam-out, the patented Impaktor system is unrivalled in performance.
-The TriTorsion system means that together the bit and holder have three torsion zones.
-Absorbs the stresses applied by constant use in heavy duty impact drivers.
-Due to the precision hardening processes, the life of the screwdriver bits is dramatically increased.
-Wera's hex screwdriver bits feature the patented Hex-Plus profile, this allows the user to apply up to 20% more torque without damaging the fastener.

Contains:
-897/4 Impaktor R Holder 1/4"x75.
-851/1 IMP DC (PH1x25 x2, PH2x25 x3, PH3x25 x2).
-855/1 IMP DC (PZ1x25 x2, PZ2x25 x3, PZ3x25 x2).
-867/1 IMP DC (TX10x25 x1, TX15x25 x1, TX20x25 x2, TX25x25 x3, TX30x25 x2, TX40x25 x2).
-840/1 IMP DC (3.0x25 x1, 4.0x25 x1, 5.0x25 x1, 6.0x25 x1).

-Wera Bit-Check 6 PZ Impaktor 1.
-Premium set of 50mm Impaktor screwdriver bits.
-Diamond coated, anti cam-out screwdriver bits are specifically designed for cordless impact drivers and are suited to the heaviest duty jobs.
-The bits have been precision hardened to allow the metal to flex in controlled areas.
-Absorbs the stresses applied by constant use in heavy duty impact drivers.
-Due to this hardening process the life of the screwdriver bit is dramatically improved.
-The Impaktor system is unrivalled in performance - Extremely hard wearing, premium quality.
-Slim compact storage case.

Contains:
-855/4 IMP DC (PZ2x50 x4, PZ3x50 x2).

-Wera Bit-Check 6TX Impaktor 1.
-Premium set of 50mm Impaktor screwdriver bits.
-Diamond coated, anti cam-out screwdriver bits are specifically designed for cordless impact drivers and are suited to the heaviest duty jobs.
-The bits have been precision hardened to allow the metal to flex in controlled areas.
-Absorbs the stresses applied by constant use in heavy duty impact drivers.
-Due to this hardening process the life of the screwdriver bit is dramatically improved.
-The Impaktor system is unrivalled in performance - Extremely hard wearing, premium quality.
-Slim compact storage case.

Contains:
-867/4 IMP DC (TX20x50 x2, TX25x50 x2, TX30x50 x1, TX40x50 x1).

-Wera Bit-Check 6 Impaktor 1.
-Premium set of 50mm Impaktor screwdriver bits.
-Diamond coated, anti cam-out screwdriver bits are specifically designed for cordless impact drivers and are suited to the heaviest duty jobs.
-The bits have been precision hardened to allow the metal to flex in controlled areas.
-Absorbs the stresses applied by constant use in heavy duty impact drivers.
-Due to this hardening process the life of the screwdriver bit is dramatically improved.
-The Impaktor system is unrivalled in performance - Extremely hard wearing, premium quality.
-Slim compact storage case.

Contains:
-851/4 IMP DC (PH2x50 x1, PH3x50 x1).
-855/4 IMP DC (PZ2x50 x1, PZ3x50 x1).
-867/4 IMP DC (TX25x50 x1, TX30x50 x1).

-Wera Bit-Check 30 Stainless 1.
-Stainless Steel screwdriver bit set and bit holder for use with stainless steel screws.
-The use of stainless tools with stainless steel fasteners prevents the cross contamination of metal, preventing rust from a galvanic process.
-Vacuum ice-hardened for industrial strength.
-A Torsion zone absorbs peak loads and prolongs the life of the bit.
-For use in the construction and food industries or wherever stainless steel fasteners and materials are used.
-Torsion zone for longer service life.

Contains:
-3888/4/1 K Rapidator stainless steel Bit Holder with quick-release chuck 1/4"x50.
-3851/1 TS PH (PH1x25 x1, PH2x25 x3, PH3x25 x1).
-3855/1 TS PZ (PZ1x25 x2, PZ2x25 x3, PZ3x25 x1).
-3867/1 TS TORX (TX10x25 x2, TX15x25 x2, TX20x25 x3, TX25x25 x3, TX30x25 x2, TX40x25 x1).
-3840/1 TS (2.5x25 x1, 3.0x25 x1, 4.0x25 x1, 5.0x25 x1, 5.5x25 x1).

-Wera Bit-Check10 Stainless 1.
-Stainless Steel screwdriver bit set and bit holder for use with stainless steel screws.
-The use of stainless tools with stainless steel fasteners prevents the cross contamination of metal, preventing rust from a galvanic process.
-Vacuum ice-hardened for industrial strength.
-A Torsion zone absorbs peak loads and prolongs the life of the bit.
-For use in the construction and food industries or wherever stainless steel fasteners and materials are used.
-Torsion zone for longer service life.

Contains:
-3888/4/1 K Rapidator stainless steel bit holder with quick release chuck 1/4"x50.
-3851/1 TS PH (PH2x25 x1).
-3855/1 TS PZ (PZ1x25 x1, PZ2x25 x2).
-3867/1 TS TORX (TX10x25 x1, TX15x25 x1, TX20x25 x1, TX25x25 x1, TX30x25 x1).

-Wera Bit Check 7 PZ Universal 2.
-Bit holder with strong permanent magnet.
-Quick-release chuck.
-Torsion style design to reduce premature wear.
-Extra hard.

Contains:
-895/4/1 K Universal bit holder 1/4"x52.
-855/1 TH PZ (PZ1x25 x2, PZ2x25 x3, PZ3x25 x1).

• Quick-release chuck for fast bit changes, chromium vanadium.

• Quick-release chuck for fast bit changes, chromium vanadium.

-Universal bit holder for use with 1/4" hexagonal screwdriver bits.
-Stainless steel sleeve, retaining ring and strong permanent magnet.
-Length: 50mm.
-Drive: 1/4".

-Universal bit holder for use with 1/4" hexagonal screwdriver bits.
-Stainless Steel sleeve, retaining ringand strong permanent magnet.
-Length: 152mm.
-Drive: 1/4".

-Rapidator universal bit holder with ring magnet.
-Magnetic ring securely holds the screw onto the bit holder to make driving screws into confined spaces or overhead much easier.
-Ideal for use in general construction.
-Suitable for dry-lining where the holder releases the screw without breaking the paper.
-It also features an auto bit lock for single hand bit change and a spin sleeve which allows the steadying of the screw start.
-For an even longer service life use Wera BiTorsion screwdriver bits.
-Bit holder has magnetic function to hold screws up to 10" long.
-Spin sleeve allows the steadying of the screw start.
-For best results, use the holder with Wera BiTorsion bits For all drill drivers (non impact).
-Length: 57mm.
-Drive 1/4".

-Rapidator universal bit holder.
-Patented quick-release bit holder securely locks the screwdriver bit in place making sure its not lost during use.
-Easy one handed bit removal due to the unique locking system.
-Bit lock and strong permanent magnet.
-Spin sleeves on the holder allows safe and comfortable.
-Rapidaptor quick release technology.
-Spin sleeve for comfortable safe use.
-Patented design technology.
-Unrivalled performance.
-Length: 50mm.
-Drive: 1/4".

-Rapidaptor BiTorsion universal bit holder.
-Part of Wera's unique BiTorsion system using Torsion Technology.
-This holder will dramatically extend the life of screwdriver bits.
-The BiTorsion system means that the holder has been precision hardened to allow the metal to flex slightly in controlled areas and absorb the stresses applied by a power tool.
-Features a press in auto bit lock for single hand bit change and a spin sleeve which allows the steadying of the screw start.
-For an even longer service life use Wera BiTorsion screwdriver bits.
-Patented BiTorsion System for longer service life.
-For best results, use the holder with Wera BiTorsion bits.
-For all drill drivers (non impact).
-Length: 75mm.
-Drive: 1/4".

-Impaktor bit holder with retaining ring and magnet.
-The Impaktor stainless steel holder with a retaining ring and magnet satisfies extreme, dynamic requirements.
-Consciously no small mechanical component parts fitted as they would be more susceptible to failure.
-It focuses on the basic bit holding function and the cushioning of the extreme impulse peaks with its two different torsion zones.
-Mainly used in industrial screw assembly applications e.g. with screwdriving robots.
-Two Torsion zones double the life of screwdriver bits, use Impaktor bits for TriTorsion!.
-Strong retaining ring and magnet spin sleeve allows the steadying of the screw start.
-For best results, use the holder with Wera Impaktor bits.
-For the heaviest duty jobs in all powertools and high voltage impact drivers.
-Length: 75mm.
-Drive: 1/4".

-Impaktor holder with retaining ring and ring magnet.
-Impaktor holder to cushion extreme impulse peaks, special torsion effect from the double-torsion spring.
-Fitted with retaining ring and magnet for secure positioning of the bit and screw.
-The Impaktor technology ensures an above-average service life even under extreme conditions.
-It is also ideal for above-head work.
-Should the magnet function not be required in a particular situation e.g. when working with metal, it can be extracted from the screwdriving area and thereby be disabled.
-Mainly used in manual power tool applications.
-Two Torsion zones double the life of screwdriver bits, use Impaktor bits for TriTorsion! Ringmagnet sleeve slides forward to hold screws up -to 10" long Spin sleeve allows the steadying of the screw start.
-For the heaviest duty jobs in all powertools and high voltage impact drivers.
-Length: 75mm.
-Drive: 1/4".

-Rapidator univeral bit holder, stainless.
-Stainless Steel bit holder for use with stainless steel screws.
-Patented quick-release bit holder securely locks the screwdriver bit Easy one handed bit removal due to the unique locking system.
-Bit lock and strong permanent magnet.
-The use of stainless tools with stainless steel fasteners prevents the cross contamination of metal, preventing rust from a galvanic process.
-Vacuum ice-hardened for industrial strength.
-For use in the construction and food industries or wherever stainless steel fasteners and materials are used.
-Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology.
-Patented design technology.
-Length: 50mm.
-Drive: 1/4".

-Wera TH Torsion Zone Bits.
-Wera Torsion technology increases service life of the bit.
-Torsion-style design reduces premature wear, extra hard.
-Made from high grade steel and precision manufactured.
-TH bits are specifically designed for use in high torque screwdriving applications, such as wood.
-Combined with the BiTorsion Rapidaptor bit holder, performance is further improved.
-Ideal for use in general construction.
-Use the Wera BiTorsion Bit Holder to increase the service life of the bit.

-Wera BTH BiTorsion Zone Bits.
-Wera's BiTorsion Extra Hard bit range is specially designed for fastening into wood.
-Hard wearing long life due to the innovative BiTorsion system; unique precision hardening.
-The extra hardness combined with the softer BiTorsion zone allows the bit to perform under immense constant increase in torque.
-The BiTorsion precision hardened bit allows the metal to flex slightly in controlled areas and absorb the stresses applied by a power tool.
-Extremely hard wearing, premium quality. (Use the Wera Impaktor System for unbeatable performance in high voltage impact drivers).
-Use the Wera BiTorsion Bit Holder to increase the service life of the bit.
-Ideal for use in general construction.

-Wera Impaktor Torsion Zone Bits.
-This premium range of Impaktor screwdriver bits are part of the patented TriTorsion system.
-Diamond coated, anti cam-out screwdriver bits are specifically designed for cordless impact drivers and are suited to the heaviest duty jobs.
-The TriTorsion system means the bit and bit holder have been precision hardened.
-Allows the metal to flex in controlled areas and absorb the stresses applied by constant use in heavy duty impact drivers.

-Wera Z Torx Bits.
-Ductile, tough bits.
-Made from high grade steel and precision manufactured.
-These bits are specifically designed for use in difficult screwdriving applications, such as in sheet metal or steel.
-Extremely hard wearing, premium quality Extra tough and ideal for screwdriving into metal.
-Drive: 1/4" Hex.

-Wera TZ Torx Torsion Zone Bits.
-Ductile, tough bits with torsion zone. Wera's Torsion technology absorbs the damaging peak torque loads that cause premature wear.
-Made from high grade steel and precision manufactured.
-These bits are specifically designed for use in difficult screwdriving applications, such as in sheet metal or steel.
-Combined with the BiTorsion Rapidaptor bit holder, performance is further improved.
-Torsion technology and unique precision hardening process increases service life of the bit.
-Extremely hard wearing, premium quality Extra tough and ideal for screwdriving into metal.
-Drive: 1/4" Hex.

-Wera BTZ Torx BiTorsion Zone Bits.
-Wera's BiTorsion Extra Hard bit range is specially designed for hard materials such as sheet steel or metal.
-The extra hardness combined with the softer BiTorsion zone allows the bit to perform under immense constant increase in torque.
-The BiTorsion system allows the precision hardened bit to flex slightly in controlled areas and absorb the stresses applied by a power tool.
-Extremely hard wearing, premium quality. (Use the Wera Impaktor System for unbeatable performance in high voltage impact drivers).
-Extra tough long life due to the innovative BiTorsion system; unique precision hardening.
-Ideal for use in general construction.
-Use the Wera BiTorsion Bit Holder to increase the service life of the bit.

-Wera Stainless Steel Bits.
-Stainless Steel screwdriver bit for use with stainless steel screws.
-The use of stainless tools with stainless steel fasteners prevents the cross contamination of metal, preventing rust from a galvanic process.
-Vacuum ice-hardened for industrial strength.
-For use in the construction and food industries or wherever stainless steel fasteners and materials are used.
-Stainless steel for minimising rust.
-Length: 89mm.
-Drive: 1/4" Hex.

-Wera TS Torsion Stainless Steel Bits.
-Stainless Steel screwdriver bit for use with stainless steel screws.
-The use of stainless tools with stainless steel fasteners prevents the cross contamination of metal, preventing rust from a galvanic process.
-Vacuum ice-hardened for industrial strength.
-A Torsion zone absorbs peak loads and prolongs the life of the bit.
-For use in the construction and food industries or wherever stainless steel fasteners and materials are used.
-Stainless steel for minimising rust.
-Special Torsion-style design to reduce premature wear.
-Length: 25mm.
-Drive: 1/4" Hex.

-Wera Bit-Check's offer screwdriver bits and bit holder in a robust compact case.
-Case is thinner than the thickest tool they contain.
-The bit range is set up to allow rapid overview and bit selection, with a simple single-hand opening mechanism.
-Wera's Torsion technologyabsorbs the damaging peak torque loads that cause premature wear.
-Made from high grade steel and precision manufactured.
-Specifically designed for use in high torque screwdriving applications, such as wood.
-Ideal for use in general construction.

Contains:
-895/4/1 K Universal Bit Holder (1/4"x52 x1) with quick-release chuck.
-855/1 TH PZ (PZ1x25 x3, PZ2x25 x3, PZ3x25 x3).

-Wera Bit-Check's offer screwdriver bits and bit holder in a robust compact case.
-Case is thinner than the thickest tool they contain.
-The bit range is set up to allow rapid overview and bit selection, with a simple single-hand opening mechanism.
-Wera's Torsion technology absorbs the damaging peak torque loads that cause premature wear.
-Made from high grade steel and precision manufactured.
-Specifically designed for use in difficult screwdriving applications, such as in sheet metal or steel.
-Hard wearing long life due to the Torsion system Bit holder with quick release chuck.
-Extra Tough ideal for screwdriving into sheet metal or steel.
-Ideal for use in general construction.

Contains:
-894/4/1 K Bit Holder (1/4"x51 x1) with quick-release chuck.
-867/1 TZ TORX (TX8x25 x1, TX9x25 x1, TX10x25 x1, TX15x25 x1, TX20x25 x1, TX25x25 x1, TX27x25 x1, TX30x25 x1, TX40x25 x1).

-Wera Bit-Check's offer screwdriver bits and bit holder in a robust compact case.
-Case is thinner than the thickest tool they contain.
-The bit range is set up to allow rapid overview and bit selection, with a simple single-hand opening mechanism.
-Ductile, tough and absorbing TORX screwdriver bits with borehole (BO) made from high quality and high strength materials.
-The unique hardening processes makes them incredibly hard wearing and the first choice for the professional.
-The TORX BO profile prevents unauthorised unfastening of safety screws.
-Contains a security pin designed to fit into the borehole of TORX BO bits allowing safety screws to be unfastened.
-Suitable for general use but also ideal for metal applications; screwdriving self-tapping screws into sheet metal or where fasteners are driven to a dead stop.
-Hard wearing long life due to the Torsion system Bit holder with quick-release chuck.
-TORX BO profile allowing TORX safety pin screws to be actuated. Ideal for use in general construction.

Contains:
-894/4/1 Bit holder (1/4"x51 x1) with quick-release chuck.
-867/1 Z TORX BO (TX10x25 x1, TX15x25 x1, TX20x25 x1, TX25x25 x1, TX30x25 x1, TX40x25 x1).

-Wera Bit-Check's offer screwdriver bits and bit holder in a robust compact case.
-Case is thinner than the thickest tool they contain.
-The bit range is set up to allow rapid overview and bit selection, with a simple single-hand opening mechanism.
-Ductile, tough bits with torsion zone. Wera's Torsion technology absorbs the damaging peak torque loads that cause premature wear.
-Made from high grade steel and precision manufactured.
-Specifically designed for use in difficult screwdriving applications, such as in sheet metal or steel.
-Hard wearing long life due to the Torsion system.
-Bit holder with quick-release chuck.
-Strong permanent magnet and spin sleeve allowing safe and comfortable work. Ideal for use in general construction.

Contains:
-889/4/1 K Bit Holder 1/4" x 50 with quick-release chuck.
-851/1 TZPH (PH1x25 x1, PH2x25 x1, PH3x25 x1).
-855/1 TZ PZ (PZ1x25 x1, PZ2x25 x1, PZ3x25 x1).
-800/1 TZ (0.8x5.5x25 x1, 1.0x5.5x25 x1, 1.2x6.5x25 x1).

-Wera Bit-Check's offer screwdriver bits and bit holder in a robust, compact case.
-Case is thinner than the thickest tool they contain.
-The bit range is set up to allow rapid overview and bit selection, with a simple single-hand opening mechanism.
-This set includes the Ringmagnet Rapidaptor bit holder which securely holds up to a 10" screw.
-Easy to drive screws into confined or overhead spaces.
-It also features an auto bit lock for single hand bit change.
-Pozidriv Extra Hard Bits and Torx Extra Tough Bits with Torsion technology that increases the service life of the bit.
-Absorbs the damaging peak torque loads that cause premature wear.
-Made from high grade steel and precision manufactured.
-Hard wearing long life bits due to the Torsion system.
-Spin sleeve allows the steadying of the screw start.
-Ideal for use in general construction.

Contains:
-887/4 RR Universal Bit Holder (1/4"x57 x1).
-855/1 TH PZ (PZ1x25 x1, PZ2x25 x2).
-867/1 TZ TORX (TX10x25 x1, TX15x25 x1, TX20x25 x1, TX25x25 x1, TX30x25 x1, TX40x25 x1).

-Wera Bit-Checks Rapidator BiTorsion with Ringmagnet.
-Wera's BiTorsion Extra Hard bit range is specially designed for fastening into wood.
-The extra hardness combined with the BiTorsion zone allows the bit to perform under the immense constant increase in torque applied when driving into wood.
-The BiTorsion system means that the bit has been precision hardened.
-Allows metal to flex slightly in controlled areas and absorb the stresses applied by a power tool.
-This compact 10 piece set also contains a high quality Ringmagnet quick release bit holder.
-One handed easy start and access to hard to reach areas.
-Use the Wera Impaktor System for unbeatable performance in high voltage impact drivers.
-Hard wearing long life due to the innovative BiTorsion system.
-Unique precision hardening Bit holder has magnetic function to hold screws up to 10" long.
-Ideal for use in general construction.

-Wera Mini Bit-Check 6 PZ Universal
-Wera Mini-Checks with 6 x 50mm long bits suitable for bit holders or for direct machine drive.
-Tough absorbing, torsion-style design (TZ) to reduce premature wear.
-Ideal for difficult screwdriving jobs e.g. in sheet steel or metal.
-Hard wearing long life due to the Torsion system.
-Extra Tough ideal for screwdriving into sheet metal or steel.
-Precision manufactured for a perfect fit.
-Ideal for use in general construction.

Contains:
-855/4TZ PZ (PZ1x50 x2, PZ2x50 x3, PZ3x50 x1).

-Wera Mini Bit-Checks TX Universal.
-Wera Mini-Checks with 6x50mm long bits suitable for bit holders or for direct machine drive.
-Tough absorbing, torsion-style design (TZ) to reduce premature wear.
-Ideal for difficult screwdriving jobs e.g. in sheet steel or metal.
-Hard wearing long life due to the Torsion system.
-Extra Tough ideal for screwdriving into sheet metal or steel.
-Precision manufactured for a perfect fit.
-Ideal for use in general construction.

Contains:
-867/4 Z TORX (TX10x50 x1, TX15x50 x1, TX20x50 x1, TX25x50 x1, TX30x50 x1, TX40x50 x1).

-Wera Bit-Check 10 Rapidator BiTorsion 2.
-Wera Bit-Check's offer screwdriver bits and bit holder in a robust, compact case.
-Case is thinner than the thickest tool they contain.
-The bit range is set up to allow rapid overview and bit selection, with a simple single-hand opening mechanism.
-This set includes BiTorsion Rapidaptor Bit Holder with Patented BiTorsion System for longer service life.
-Press in auto bit lock; single hand bit change and spin sleeve allowing steadying of the screw start.
-BiTorsion Extra Tough bits allow peak loads to be absorbed in the BiTorsion zone avoiding premature bit breakage.
-Precision hardened Bitorsion system allows the bit to flex slightly in controlled areas and absorb the stresses applied by a power tool.
-Extremely hard wearing, premium quality bits.
-BiTorsion Bit Holder with longer service life, single hand bit change and spin sleeve.
-Ideal for use in general construction. Use the Wera BiTorsion Bit Holder to increase the service life of the bit.

Contains:
-897/4 R BiTorsion Bit Holder 1/4"x75 Rapidator with quick-release chuck.
-851/1 BTZ PH (PH2x25 x1).
-855/1 BTZ PZ (PZ1x25 x1, PZ2x25 x2).
-867/1 TORX BTZ (TX10x25 x1, TX15x25 x1, TX20x25 x1, TX25x25 x1, TX30x25 x1).

-Wera Bit-Check 10 Rapidator BiTorsion 2.
-Wera Bit-Check's offer screwdriver bits and bit holder in a robust, compact case.
-Case is thinner than the thickest tool they contain.
-The bit range is set up to allow rapid overview and bit selection, with a simple single-hand opening mechanism.
-This set includes BiTorsion Rapidaptor Bit Holder with Patented BiTorsion System for longer service life.
-Press in auto bit lock; single hand bit change and spin sleeve allowing steadying of the screw start.
-BiTorsion Extra Tough bits allow peak loads to be absorbed in the BiTorsion zone avoiding premature bit breakage.
-Precision hardened Bitorsion system allows the bit to flex slightly in controlled areas and absorb the stresses applied by a power tool.
-Extremely hard wearing, premium quality bits.
-BiTorsion Bit Holder with longer service life, single hand bit change and spin sleeve.
-Ideal for use in general construction. Use the Wera BiTorsion Bit Holder to increase the service life of the bit.

Contains:
-BiTorsion Bit Holder 1/4"x75 Rapidator with quick-release chuck.
-BiTorsion BTZ PZ1x25mm x1.
-BiTorsion BTZ PZ2x25mm x7.
-BiTorsion BTZ PZ3x25mm x1.

-Wera Bit-Check30 Rapidator BiTorsion1.
-Wera Bit-Check's offer screwdriver bits and bit holder in a robust, compact case.
-Case is thinner than the thickest tool they contain.
-The bit range is set up to allow rapid overview and bit selection, with a simple single-hand opening mechanism.
-This set includes BiTorsion Rapidaptor Bit Holder with Patented BiTorsion System for longer service life.
-Press in auto bit lock; single hand bit change and spin sleeve allowing steadying of the screw start.
-BiTorsion Extra Tough bits allow peak loads to be absorbed in the BiTorsion zone avoiding premature bit breakage.
-Precision hardened Bitorsion system allows the bit to flex slightly in controlled areas and absorb the stresses applied by a power tool.
-Extremely hard wearing, premium quality bits.
-BiTorsion Bit Holder with longer service life, single hand bit change and spin sleeve.
-Ideal for use in general construction.
-Use the Wera BiTorsion Bit Holder to increase the service life of the bit.

Contains:
-BiTorsion Bit Holder 1/4" x50mm Rapidator bit holder.
-BiTorsion 25mm BTZ Phillips bits: PH1 (x2), PH2 (x5), PH3 (x2).
-BiTorsion 25mm BTZ Pozidriv bits: PZ1 (x2), PZ2 (x6), PZ3 (x2).
-BiTorsion 25mm BTZ Torx bits: TX10, TX15 (x2), TX20 (x2), TX25 (x2), TX30 (x2), TX40.

-Bit-Check 10 Impaktor 3.
-Impaktor bit set contains the premium TriTorsion Bit Holder with optional Ringmagnet function to hold screws up to 10" long.
-Stored in a slim compact easy open case for tool security easy bit selection.
-Specifically designed for cordless impact drivers, these bits are suited to the heaviest duty jobs.
-Diamond coated for anti cam-out, the patented Impaktor system is unrivalled in performance.
-The TriTorsion system means that together the bit and holder have three torsion zones.
-Absorb the stresses applied by constant use in heavy duty impact drivers.
-Due to the precision hardening processes, the life of the screwdriver bits is dramatically increased.
-Patented long life TriTorsion system - for above average service life.
-Precision manufactured for a perfect fit.

Contains:
-897/4 Impaktor R Holder 1/4"x75.
-855/1 IMP DC (PZ2x25 x3, PZ3x25 x1).
-867/1 IMP DC (TX25x25 x3, TX30x25 x1, TX40x25 x1).

-Bit-Check 10 PZ Impaktor 1.
-Impaktor bit set contains the premium TriTorsion Bit Holder with optional Ringmagnet function to hold screws up to 10" long.
-Stored in a slim compact easy open case for tool security easy bit selection.
-Specifically designed for cordless impact drivers, these bits are suited to the heaviest duty jobs.
-Diamond coated for anti cam-out, the patented Impaktor system is unrivalled in performance.
-The TriTorsion system means that together the bit and holder have three torsion zones.
-Absorb the stresses applied by constant use in heavy duty impact drivers.
-Due to the precision hardening processes, the life of the screwdriver bits is dramatically increased.
-Patented long life TriTorsion system - for above average service life.
-Precision manufactured for a perfect fit.

Contains:
-897/4 Impaktor R Holder 1/4"x75.
-855/1 IMP DC (PZ2x25 x7, PZ3x25 x2).

-Wera Bit-Check 30 Impaktor 1.
-Impaktor bit set contains the premium TriTorsion Bit Holder with optional Ringmagnet function to hold screws up to 10" long.
-Complemented by additional screwdriver bit sizes from the high quality Wera bit range.
-Stored in a slim compact easy open case for tool security easy bit selection.
-Specifically designed for cordless impact drivers, these bits are suited to the heaviest duty jobs.
-Diamond coated for anti cam-out, the patented Impaktor system is unrivalled in performance.
-The TriTorsion system means that together the bit and holder have three torsion zones.
-Absorbs the stresses applied by constant use in heavy duty impact drivers.
-Due to the precision hardening processes, the life of the screwdriver bits is dramatically increased.
-Wera's hex screwdriver bits feature the patented Hex-Plus profile, this allows the user to apply up to 20% more torque without damaging the fastener.

Contains:
-897/4 Impaktor R Holder 1/4"x75.
-851/1 IMP DC (PH1x25 x2, PH2x25 x3, PH3x25 x2).
-855/1 IMP DC (PZ1x25 x2, PZ2x25 x3, PZ3x25 x2).
-867/1 IMP DC (TX10x25 x1, TX15x25 x1, TX20x25 x2, TX25x25 x3, TX30x25 x2, TX40x25 x2).
-840/1 IMP DC (3.0x25 x1, 4.0x25 x1, 5.0x25 x1, 6.0x25 x1).

-Wera Bit-Check 6 PZ Impaktor 1.
-Premium set of 50mm Impaktor screwdriver bits.
-Diamond coated, anti cam-out screwdriver bits are specifically designed for cordless impact drivers and are suited to the heaviest duty jobs.
-The bits have been precision hardened to allow the metal to flex in controlled areas.
-Absorbs the stresses applied by constant use in heavy duty impact drivers.
-Due to this hardening process the life of the screwdriver bit is dramatically improved.
-The Impaktor system is unrivalled in performance - Extremely hard wearing, premium quality.
-Slim compact storage case.

Contains:
-855/4 IMP DC (PZ2x50 x4, PZ3x50 x2).

-Wera Bit-Check 6TX Impaktor 1.
-Premium set of 50mm Impaktor screwdriver bits.
-Diamond coated, anti cam-out screwdriver bits are specifically designed for cordless impact drivers and are suited to the heaviest duty jobs.
-The bits have been precision hardened to allow the metal to flex in controlled areas.
-Absorbs the stresses applied by constant use in heavy duty impact drivers.
-Due to this hardening process the life of the screwdriver bit is dramatically improved.
-The Impaktor system is unrivalled in performance - Extremely hard wearing, premium quality.
-Slim compact storage case.

Contains:
-867/4 IMP DC (TX20x50 x2, TX25x50 x2, TX30x50 x1, TX40x50 x1).

-Wera Bit-Check 6 Impaktor 1.
-Premium set of 50mm Impaktor screwdriver bits.
-Diamond coated, anti cam-out screwdriver bits are specifically designed for cordless impact drivers and are suited to the heaviest duty jobs.
-The bits have been precision hardened to allow the metal to flex in controlled areas.
-Absorbs the stresses applied by constant use in heavy duty impact drivers.
-Due to this hardening process the life of the screwdriver bit is dramatically improved.
-The Impaktor system is unrivalled in performance - Extremely hard wearing, premium quality.
-Slim compact storage case.

Contains:
-851/4 IMP DC (PH2x50 x1, PH3x50 x1).
-855/4 IMP DC (PZ2x50 x1, PZ3x50 x1).
-867/4 IMP DC (TX25x50 x1, TX30x50 x1).

-Wera Bit-Check 30 Stainless 1.
-Stainless Steel screwdriver bit set and bit holder for use with stainless steel screws.
-The use of stainless tools with stainless steel fasteners prevents the cross contamination of metal, preventing rust from a galvanic process.
-Vacuum ice-hardened for industrial strength.
-A Torsion zone absorbs peak loads and prolongs the life of the bit.
-For use in the construction and food industries or wherever stainless steel fasteners and materials are used.
-Torsion zone for longer service life.

Contains:
-3888/4/1 K Rapidator stainless steel Bit Holder with quick-release chuck 1/4"x50.
-3851/1 TS PH (PH1x25 x1, PH2x25 x3, PH3x25 x1).
-3855/1 TS PZ (PZ1x25 x2, PZ2x25 x3, PZ3x25 x1).
-3867/1 TS TORX (TX10x25 x2, TX15x25 x2, TX20x25 x3, TX25x25 x3, TX30x25 x2, TX40x25 x1).
-3840/1 TS (2.5x25 x1, 3.0x25 x1, 4.0x25 x1, 5.0x25 x1, 5.5x25 x1).

-Wera Bit-Check10 Stainless 1.
-Stainless Steel screwdriver bit set and bit holder for use with stainless steel screws.
-The use of stainless tools with stainless steel fasteners prevents the cross contamination of metal, preventing rust from a galvanic process.
-Vacuum ice-hardened for industrial strength.
-A Torsion zone absorbs peak loads and prolongs the life of the bit.
-For use in the construction and food industries or wherever stainless steel fasteners and materials are used.
-Torsion zone for longer service life.

Contains:
-3888/4/1 K Rapidator stainless steel bit holder with quick release chuck 1/4"x50.
-3851/1 TS PH (PH2x25 x1).
-3855/1 TS PZ (PZ1x25 x1, PZ2x25 x2).
-3867/1 TS TORX (TX10x25 x1, TX15x25 x1, TX20x25 x1, TX25x25 x1, TX30x25 x1).