BPC Timber Engineering Hardware

The prices displayed are based on the purchase of full outer quantities. Price breaks are available where indicated.

Truss Clips

Truss Clips provide an inexpensive and effective method of fixing trussed rafters to wallplates.

Manufactured from 0.9mm thick galvanised steel.
Can also be used for general applications as a multi-purpose connector to provide restraint whenever two timber members cross.
Fix using 30 x 3.75mm sherardised square twist nails in all pre-punched holes.

Truss Clips
Code Barcode Size Finish Box Qty Outer Quantity
BPCTC38 5060138580596 38mm Galvanised 1 100 Login or call us for details of your nearest distributor.
BPCTC44 5060138583573 44mm Galvanised 1 100 Login or call us for details of your nearest distributor.
BPCTC47 5060138588134 47mm Galvanised 1 100 Login or call us for details of your nearest distributor.
BPCTC50 5060138580602 50mm Galvanised 1 100 Login or call us for details of your nearest distributor.

Splice Plates w/ Nails

An economical on-site method of butt jointing timbers of similar section.

Suitable for use when replacing rotten floor joist ends, replacement of fire damaged timbers and repairing localised structural timber damage.
Must be fixed in sets of 4 per joint, minimum timber thickness 50mm.
Fix using sherardised square twist nails in all available holes.
Box includes required nails.

Splice Plates w/ Nails
Code Barcode Size Finish Box Qty Outer Quantity
BPCSP57X18X40032PK 5060138586093 57 x 18 x 400mm Galvanised 32 1 Login or call us for details of your nearest distributor.
BPCSP82X18X55032PK 5060138586109 82 x 18 x 550mm Galvanised 32 1 Login or call us for details of your nearest distributor.
BPCSP98X18X55032PK 5060138586116 98 x 18 x 550mm Galvanised 32 1 Login or call us for details of your nearest distributor.

Hand Nail Plates

A cost effective method of jointing structural timbers (such as site built trusses) simply by nailing through the pre-punched holes.

Plates must be fixed on both sides of the timber.
Manufactured from galvanised steel to BS EN 10346:2009 + G275.
The pressed dimple design adds strength and rigidity to the component whilst also assisting in the location of nails.
Fix using 30 x 3.75mm sheradised square twist nails.

Hand Nail Plates
Code Barcode Size Finish Box Qty Outer Quantity
BPCNP50X150 5060138581777 50 x 150mm Galvanised 1 250 Login or call us for details of your nearest distributor.
BPCNP80X150 5060138581784 80 x 150mm Galvanised 1 250 Login or call us for details of your nearest distributor.
BPCNP80X200 5060138581791 80 x 200mm Galvanised 1 200 Login or call us for details of your nearest distributor.
BPCNP80X250 5060138581807 80 x 250mm Galvanised 1 100 Login or call us for details of your nearest distributor.
BPCNP80X300 5060138581814 80 x 300mm Galvanised 1 100 Login or call us for details of your nearest distributor.
BPCNP100X150 5060138581845 100 x 150mm Galvanised 1 100 Login or call us for details of your nearest distributor.
BPCNP100X200 5060138581852 100 x 200mm Galvanised 1 100 Login or call us for details of your nearest distributor.
BPCNP100X250 5060138581869 100 x 250mm Galvanised 1 100 Login or call us for details of your nearest distributor.
BPCNP150X200 5060138581906 150 x 200mm Galvanised 1 100 Login or call us for details of your nearest distributor.
BPCNP150X250 5060138581913 150 x 250mm Galvanised 1 100 Login or call us for details of your nearest distributor.

Truss Clips

Truss Clips provide an inexpensive and effective method of fixing trussed rafters to wallplates.

Manufactured from 0.9mm thick galvanised steel.
Can also be used for general applications as a multi-purpose connector to provide restraint whenever two timber members cross.
Fix using 30 x 3.75mm sherardised square twist nails in all pre-punched holes.

Truss Clips
Code
BPCTC38
BPCTC44
BPCTC47
BPCTC50

Splice Plates w/ Nails

An economical on-site method of butt jointing timbers of similar section.

Suitable for use when replacing rotten floor joist ends, replacement of fire damaged timbers and repairing localised structural timber damage.
Must be fixed in sets of 4 per joint, minimum timber thickness 50mm.
Fix using sherardised square twist nails in all available holes.
Box includes required nails.

Splice Plates w/ Nails
Code
BPCSP57X18X40032PK
BPCSP82X18X55032PK
BPCSP98X18X55032PK

Hand Nail Plates

A cost effective method of jointing structural timbers (such as site built trusses) simply by nailing through the pre-punched holes.

Plates must be fixed on both sides of the timber.
Manufactured from galvanised steel to BS EN 10346:2009 + G275.
The pressed dimple design adds strength and rigidity to the component whilst also assisting in the location of nails.
Fix using 30 x 3.75mm sheradised square twist nails.

Hand Nail Plates
Code
BPCNP50X150
BPCNP80X150
BPCNP80X200
BPCNP80X250
BPCNP80X300
BPCNP100X150
BPCNP100X200
BPCNP100X250
BPCNP150X200
BPCNP150X250

Truss Clips

Truss Clips provide an inexpensive and effective method of fixing trussed rafters to wallplates.

Manufactured from 0.9mm thick galvanised steel.
Can also be used for general applications as a multi-purpose connector to provide restraint whenever two timber members cross.
Fix using 30 x 3.75mm sherardised square twist nails in all pre-punched holes.

Truss Clips
Code Pack Weight (Kg) Outer Qty Outer Weight (Kg)
BPCTC38 0.075 100 7.5
BPCTC44 0.075 100 7.5
BPCTC47 0.075 100 7.5
BPCTC50 0.075 100 7.5

Splice Plates w/ Nails

An economical on-site method of butt jointing timbers of similar section.

Suitable for use when replacing rotten floor joist ends, replacement of fire damaged timbers and repairing localised structural timber damage.
Must be fixed in sets of 4 per joint, minimum timber thickness 50mm.
Fix using sherardised square twist nails in all available holes.
Box includes required nails.

Splice Plates w/ Nails
Code Pack Weight (Kg) Outer Qty Outer Weight (Kg)
BPCSP57X18X40032PK 11.3 1 11.3
BPCSP82X18X55032PK 21.2 1 21.2
BPCSP98X18X55032PK 23.9 1 23.9

Hand Nail Plates

A cost effective method of jointing structural timbers (such as site built trusses) simply by nailing through the pre-punched holes.

Plates must be fixed on both sides of the timber.
Manufactured from galvanised steel to BS EN 10346:2009 + G275.
The pressed dimple design adds strength and rigidity to the component whilst also assisting in the location of nails.
Fix using 30 x 3.75mm sheradised square twist nails.

Hand Nail Plates
Code Pack Weight (Kg) Outer Qty Outer Weight (Kg)
BPCNP50X150 0.05 250 12.5
BPCNP80X150 0.08 250 20
BPCNP80X200 0.104 200 20.8
BPCNP80X250 0.104 100 10.4
BPCNP80X300 0.154 100 15.4
BPCNP100X150 0.12 100 12
BPCNP100X200 0.128 100 12.8
BPCNP100X250 0.16 100 16
BPCNP150X200 0.16 100 16
BPCNP150X250 0.182 100 18.2